Fire Safety on Building Sites
Building environments, especially those in a transitional phase, present distinct fire hazards due to frequent layout changes, mobile equipment, and scattered workforces. A sound alerting system is necessary for notifying workers without delay. The Howler line-up, including the radio-based GOLink system, HO units, and site alert models, provides a tailored safety setup to match various site demands.
What Exactly Are HO Alarms?
HO alarms are self-powered, battery-operated devices used where traditional systems are impractical. Ideal for portable cabins or outbuildings, they function autonomously.
- Loud alarm: Around 102 dB at a metre’s distance.
- Visual signal option: Some models include integrated lights for visibility.
- IP-rated: Many are suited for external mounting or partially exposed areas.
These alarms provide supplementary coverage where the main alert network may not reach.
The Howler Site Alert Range
Suitable for mid-sized projects, the Site Alert system operates individually or in linked setups of up to 20 units using a simple two-core cable. When triggered, all devices in the series respond simultaneously.
- Approx. 100 dB sound level at 1 metre
- Built-in flashing beacon for loud or noisy settings
- Recommended where cabling is straightforward
Going Wireless: Site Alert RF
Where cable routes aren't possible, Site Alert RF links up to 30 units over wireless. It has an open-area range of around 1 km and supports multiple channels for interference avoidance.
Combining wireless and cabled systems is frequently the best strategy for sites with varying structures.
Integrating the GOLink System
The GOLink system acts as a coordinating hub for large, multi-zone installations, using wireless signals to connect multiple devices.
GOLink Interface Connections
Through the Interface Unit, it’s possible to tie into turnstiles, autodiallers, CCTV, and other site safety components. Up to 127 points can connect across a site-wide network.
First Aid Callouts
Certain models (e.g. H05 GOLink) click here include a first aid button alongside the fire alert. The first aid signal quietly notifies the control team, allowing medical needs to be flagged without general evacuation.
How to Deploy Effectively
- Zone assessment: Identify where alarms need to be noticeable, dividing the site into manageable sectors.
- Choose connection types wisely: Use hard-wired alarms where feasible, supplementing with RF in distant or pop-up areas.
- Set a maintenance routine: Schedule weekly testing and monitor battery levels.
- Training & signage: Ensure instructions are posted and team members know how to respond to alerts.
Common Questions
- Wired capacity?
- Up to 20 Site Alert units can be connected using 2-core cable.
- What’s the wireless range of Site Alert RF?
- Approx. 1 km in open-air conditions, though physical obstructions can reduce range.
- Do HO alarms need a base station?
- No, HO models are self-sufficient and do not require central control.
- Can GOLink interface with other site systems?
- Yes, external systems can be connected via the GOLink Interface Unit.
- Why use an alarmed switch cover?
- It reduces false alarms by sounding a warning if tampered with before activation.
- Hybrid setup compatibility?
- Yes, the GOLink system allows wired and wireless units to operate on the same network.
- Does first aid signal cause evacuation?
- No. It sends a targeted alert to designated receivers without activating evacuation systems—unless configured otherwise.
Final Notes
Whether your project involves one zone or several, Howler alarms—HO, GOLink, and Site Alert—deliver protection that adjust to varying conditions. For product information, planning tools or live demos, visit the Howler section on FireSense.