Managing Fire Hazards on Site
Construction sites, especially those in a temporary phase, present specific fire hazards due to frequent layout changes, relocatable equipment, and divided workforces. A reliable alerting system is necessary for notifying workers without delay. The Howler range, including the radio-based GOLink system, HO units, and site alert models, provides a tailored safety solution to match various site demands.
A Look at HO Alarms
HO alarms are self-powered, battery-operated devices used where traditional systems are impractical. Ideal for portable cabins or outbuildings, they function autonomously.
- High sound output: Around 102 dB at a metre’s distance.
- Optional strobe: Some models include integrated lights for visibility.
- IP-rated: Many are suited for external mounting or partially exposed areas.
These alarms provide supplementary coverage where the core alert network may not reach.
The Howler Site Alert Range
Suitable for mid-sized projects, the Site Alert system operates individually or in groups of up to 20 units using a simple two-core cable. When set off, all devices in the network respond simultaneously.
- Approx. 100 dB sound level at 1 metre
- Built-in visual LED for loud or noisy settings
- Ideal where cabling is straightforward
Site Alert RF (Radio-Frequency)
Where cable routes aren't possible, Site Alert RF links up to 30 units over wireless. It has an open-area here range of around 1 km and supports multiple frequencies for interference avoidance.
Blending wireless and cabled systems is commonly the best choice for sites with varying structures.
Integrating the GOLink System
The GOLink system acts as a coordinating hub for large, multi-zone installations, using wireless signals to connect multiple devices.
Connecting to Site Systems
Through the Interface Unit, it’s possible to link turnstiles, autodiallers, CCTV, and other site safety components. Up to 127 points can connect across a site-wide network.
First Aid Callouts
Certain models (e.g. H05 website GOLink) include a first aid button alongside the fire alert. The first aid signal quietly notifies the control team, allowing medical needs to be flagged without general evacuation.
Deployment Guidelines
- Zone assessment: Identify where alarms need to be heard or seen, dividing the site into manageable sectors.
- Choose connection types wisely: Use hard-wired alarms where feasible, supplementing with RF in distant or temporary areas.
- Set a maintenance routine: Schedule weekly testing and monitor battery levels.
- Training & signage: Ensure instructions are posted and team members know how to respond to alerts.
FAQs
- Wired capacity?
- Up to 20 Site Alert units can be connected using 2-core cable.
- How far does the wireless version reach?
- Approx. 1 km in open-air conditions, though physical obstructions can reduce range.
- Do HO alarms need a base station?
- No, HO models are self-sufficient and do not require central control.
- Can GOLink interface with other site systems?
- Yes, external systems can be connected via the GOLink Interface Unit.
- Purpose of switch protection?
- It reduces false alarms by sounding a warning if tampered with before activation.
- Hybrid setup compatibility?
- Yes, the GOLink system allows wired and wireless units to operate on the same network.
- Will first aid alerts trigger full alarms?
- No. It sends a targeted alert to designated receivers without activating evacuation systems—unless configured otherwise.
Wrap-up
Whether your project involves one zone or several, Howler alarms—HO, GOLink, and Site Alert—offer solutions that adapt to varying conditions. For product information, planning tools or live demos, visit the Howler section on FireSense.